More stability
by double-walled aluminum frame with a height of 35 mm silver anodized.
U surround filled with glue
into which the edge of the laminate is sealed and glued.
Optimum security against torsion
Thanks to the frame assembled under pressure, which, after reaching the end position, is fixed with metal brackets. This greatly reinforces the corners!
No loss of performance
No dark frame or background so that the module doesn’t get even hotter – because temperature means loss of performance!
Especially great protection
against hail and high wind speeds thanks to specially hardened, translucent glass.
Easy swapping of the diodes
The stable junction box on the back with access to the bypass diodes.
Uncomplicated assembly
The junction box is lower than the frame height, this means that the solar module cannot be easily damaged when installed on the roof.
Ideal for installation in 12 volt systems
through the MPP voltage 18 volts,. If the MPP voltage were higher, a PWM charge controller would have excessive losses. Connected in series, the modules can also be used for 24 volt systems.
